Allen-Bradley Powermonitor 3000 User Manual page 328

G-4 Powermonitor 3000 ControlNet Device Profile
Publication 1404-UM001D-EN-E - October 2004
Behavior
The Powermonitor 3000 system's Identity instances handle reset
services in the following manner according to the reset type
requested:
Table G.7 Reset Behavior
Instance Reset Type
1 (PM 3000) 0 (Out of Box)
1 (PM 3000) 1 ( Power Cycle)
2 (DC) 0 (Out of Box)
2 (DC) 1 ( Power Cycle)
Get Attribute Single Service
The Get Attribute Single service returns the single attribute specified
by the parameter Attribute ID.
Request Parameters
Table G.8 Get Attribute Single Service
Parameter Data Type Description
Attribute ID UINT
Identity Object Instances
The DC's Identity Object supports the following instances:
Instance 1 (PM 3000)
Instance 1 represents the PM 3000 device. Since instance 1 of the
Identity Object is the one which is browsed by RS Linx, the complete
device (i.e. the PM 3000 with DC) will appear in RS Who as a PM 3000
rather than a DC.
Instance 1 of the Identity Object reports the following instance
specific attribute values:
Action
Notify the PM 3000 and respond to the request
Return 0x09 (Bad Attribute Data)
Notify the PM 3000 and respond to the request
Return 0x09 (Bad Attribute Data)
Identifies the attribute to be read / returned