Allen-Bradley Powermonitor 3000 User Manual page 58

3-32 Powermonitor 3000 Operations
Publication 1404-UM001D-EN-E - October 2004
DST start day instance
Selects which instance of the DST start day in the DST start month
when DST begins. Range 1 = first, 2 = second, 3 = third, 4 = fourth, 5
= last
DST start hour
Selects the hour of the day when DST begins. Range 0 = midnight, 1 =
1:00 a.m., ... , 23 = 11:00 p.m.
DST end month
This parameter and the following three determine when DST ends
and are configured the same as the start parameters above.
• DST end day
• DST end day instance
• DST end hour
DST is disabled by default. When enabled, the default start time is
2:00 a.m. on the first Sunday in April, and the default end time is 2:00
a.m. on the last Sunday in October.
Table 3.9 Daylight savings time configuration summary
Parameter name
DST Enable
DST Start Month
DST Start Day
DST Start Day Instance
DST Start Hour
DST End Month
DST End Day
DST End Day Instance
DST End Hour
Range Default
0 to 1 0
1-12 4
0-6 0
1-5 1
0-23 2
1-12 10
0-6 0
1-5 5
0-23 2
User Setting