Allen-Bradley Powermonitor 3000 User Manual page 187

Ethernet
Element Modbus Element name
No. Address
14 40415 Protocol select (ENT Series A)
Reserved (ENT Series B)
15 40416 Reserved
16 40417
17 40418
18 40419
19 40420
ControlNet
Element Modbus Element name
No. Address
0 40401 Password
1 40402 MAC ID
2 40403 Reserved
3 40404
4 40405
5 40406
6 40407
7 40408
8 40409
9 40410
10 40411
11 40412
12 40413
13 40414
14 40415
15 40416
16 40417
17 40418
18 40419
19 40420
Allen-Bradley HMIs
Range Units
0 -
0 -
Range Units Default
Value
0 to 9999 - 0
0 to 99 - 99
0 - 0
Powermonitor 3000 Data Tables
Default Comment
Value
0 to 2 When master module firmware > = V1.12
& Ethernet firmware > = V2.01,
0 = CSP/CIP (concurrent support for both
protocols)
1 = CSP protocol
2 = CIP protocol
When master module firmware <V1.12 &
Ethernet firmware <V2.01, protocol
supported is CSP and this parameter is
reserved (write a 0, always reads 0).
Reserved on Series B. Must be 0 on a
write, returns 0
0 Reserved. Must be 0 on a write, returns 0
Comment
Valid password required to change configuration data.
Returns -1
On a write, sets MAC ID (node address) of
Powermonitor 3000 on ControlNet network.
Reserved. Must be 0 on a write, returns 0
Publication 1404-UM001D-EN-E - October 2004
A-13