Allen-Bradley Powermonitor 3000 User Manual page 46

3-20 Powermonitor 3000 Operations
Publication 1404-UM001D-EN-E - October 2004
3. Choose the option of the command by pressing the Up Arrow
and Down Arrow keys until the desired option is displayed.
Notice the phase indicators on the right-hand side remain solid
and the command option being selected is still flashing.
Figure 3.7 Command Option
Powermonitor 3000 wermonitor 3000
AY-1
L1
L2
Energ
L3
N
4. After the desired command option is displayed, press the Enter
key to execute the command. The selection prompt reappears
and the Display Module is set back to Program mode. Notice the
phase indicators on the right-hand side are flashing again and
the option prompt is now solid.
Figure 3.8 Program Mode
Powermonitor 3000
ORCE
L1
L2
UP-DN
L3
5. To abort a command, press the Escape key. The Display Module
returns to Program mode and the option prompt is displayed
again. Notice the phase indicators on the right-hand side are
now flashing and the option prompt is now solid.
N