Allen-Bradley Powermonitor 3000 User Manual page 23

Powermonitor 3000
F1
}
RX
RS-232
TX
Powermonitor 3000 wermonitor 3000
F1
F2
R I/O
Powermonitor 3000
F1
F2
NETWORK
STATUS
Allen-Bradley HMIs
Table 2.4 RS-232 Optional Communications (catalog numbers ending in -232)
LED LED Color
F1 Off
RS-232 RX Off
Flashing Green
RS-232 TX Off
Flashing Green
Table 2.5 Remote I/O Optional Communications (catalog numbers ending in -RIO)
LED LED Color
F1 Off
F2 Off
R I/O Off
Flashing Green
Steady Green
Table 2.6 DeviceNet Optional Communications (catalog numbers ending in -DNT)
LED LED Color
F1 Off
F2 Off
Network Status Off
Flashing Green
Steady Green
Flashing Red
Steady Red
Product Description
LED State and Communications
Condition
Not Used
The RS-232 bus is idle; no active data is
present
Powermonitor 3000 is receiving data.
The Powermonitor 3000 is not transmitting
any data onto the RS-232 bus
The Powermonitor 3000 is transmitting
data.
LED State and Communications
Condition
Not Used
Not Used
Remote I/O communications has not been
established
Remote I/O communications has been
established but there are errors
Remote I/O communications has been
established
LED State and Communications
Condition
Not Used
Not Used
Power is off or the Powermonitor 3000 is
not online
Network status is OK, no connections
established
Network status is OK, connections
established
Recoverable communications failure; port is
restarting
Non-recoverable communications error;
check wiring and configuration parameters
Publication 1404-UM001D-EN-E - October 2004
2-11