Identity Object; Class Attributes; Instance Attributes - Allen-Bradley Powermonitor 3000 User Manual

G-2 Powermonitor 3000 ControlNet Device Profile

Identity Object

Class Attributes

Instance Attributes

Publication 1404-UM001D-EN-E - October 2004
Table G.2 Interface
Object
Assembly
PCCC
NVS
Class Code: 01
hex
The Identity Object is used to provide identification information about
the device. The Powermonitor 3000 system supports two instances of
the identity object to provide identity information about the PM 3000
itself as well as the DC.
Section 5-2 of the CIP Common Specification provides additional
details about this object.
Table G.3 Class Attributes
Attr Acces Name
ID s
0x01 Get Revision
0x02 Get Max Instance
0x06 Get Max Class Attribute
0x07 Get Max Instance Attribute
Table G.4 Instance Attributes
Attr Acces Name
ID s
0x01 Get Vendor ID
0x02 Get Device Type
0x03 Get Product Code
0x04 Get Revision
Interface
Connection or Message Router
Message Router
Message Router
Data Type
UINT
UINT
UINT
UINT
Data Type
UINT
UINT
UINT
Struct of:
Default
Value
1
2
7
7