Dynamic Web Server Functionality - Allen-Bradley Powermonitor 3000 User Manual

Dynamic Web Server
Functionality
Allen-Bradley HMIs
to the utility meter and propagated to other PM 3000s on the same
network.
Configuration Parameters
Before the DC can either produce or consume EOIP signals, it
requires the following configuration parameter:
Table F.32 End of Interval Pulse Task Configuration Parameters
Name
Port
Port
The UDP port number on which the EOIP signal packet will be
transmitted or received.
A port value of 0 disables both the EOIP producer
TIP
and consumer functionality.
The DC implements a dynamic web server so that run time data from
the PM 3000, as well as other web content desired, can be viewed by
any standard web browser on the network.
Configuring the Web Server
The DC's dynamic web server does not require any specific
configuration parameters from the PM 3000 during initialization.
Powermonitor 3000 EtherNet/IP Device Profile
Data Type
UINT
Publication 1404-UM001D-EN-E - October 2004
F-17