Allen-Bradley Powermonitor 3000 User Manual page 136

7-4 Data Logging
Publication 1404-UM001D-EN-E - October 2004
Table 7.2 Status Error Codes
Bits Hex
bit 0 0001h
bit 1 0002h
bit 2 0004h
bit 3 0008h
bit 4 0010h
bit 5 0020h
bit 6 0040h
bit 7 0080h
bit 8 0100h
bit 9 0200h
bit 10 0400h
bit 11 0800h
bit 12-15 1000h
-8000h
Configuring the Event Log Using Communications
You may configure the Event Log by performing a valid table write to
Table A.26 Event Log Configuration/Read-Back Record Select. This
read/write data table contains these 6 integer elements:
• Password: A valid password is required to set configuration
options or -1 to select a record for read-back
•
DeviceNet unique write identifier
• Read-back mode: see below
• Status input logging: 0 disables; 1 enables
• Number of events logged: this read-only element is ignored on a
write
• Time/date set logging: 0 disables; 1 enables
Description
Master Module code flash status
Master Module data flash status
Master Module RAM Status
Reserved for factory use
Master Module NVRAM status
Master Module data acquisition status
Master Module real time clock status
Reserved for factory use
Reserved for factory use
Display Module status
Master Module watchdog timer status
Master Module optional communications status
Reserved for factory use