Configuration Using The Display Module - Allen-Bradley Powermonitor 3000 User Manual

Table 3.6 Commands
Parameter
Force Relay
Force KYZ
Clear Min/Max Log
Clear kWh Counter
Clear kVARh Counter
Clear kVAh Counter
Clear Ah Counter
Clear All Energy Counters
Clear S1 Counter
Clear S2 Counter
Restore Defaults Settings
Clear Setpoint Timers
Configuration Using the
Display Module
Allen-Bradley HMIs
Description
Forces relay to a known state in which the relay
remains at that state until the force is removed.
Forces KYZ to a known state in which the relay
remains at that state until the force is removed.
Resets the Min/Max log with the current real
time metering information.
Resets the kWh net counter to zero.
Resets the kVARh net counter to zero.
Resets the kVAh net counter to zero.
Resets the Ah net counter to zero.
Resets all cumulative energy counter to zero.
Resets Status 1 counter to zero.
Resets Status 2 counter to zero.
Restores all settings to factory default.
Clears the time accumulated in each setpoint
timer.
The Display Module provides an inexpensive, easy-to-operate method
for setting up Powermonitor 3000 parameters to adapt it to your
power system and select the performance options you desire. You
configure the Powermonitor 3000 using Program Mode and Edit Mode
of the Display Module. Once you have become familiar with the key
functions, you will find that setting up a new Powermonitor 3000 is a
simple process.
You may also configure the Powermonitor 3000 via communications,
and certain advanced features of the Powermonitor 3000 may be
configured only via communications. Please refer to the appropriate
sections of the User manual for more information.
Powermonitor 3000 Operations
Range
De-energize
Energize
No Force
De-energize
Energize
No Force
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Publication 1404-UM001D-EN-E - October 2004
3-21