Allen-Bradley Powermonitor 3000 User Manual page 68

4-8 Communications
Publication 1404-UM001D-EN-E - October 2004
Table 4.4 Optional DeviceNet Communications Configuration Summary
Parameter Description
Node DeviceNet node
Address number (MAC ID)
Baud Rate DeviceNet
Communications
Rate
Bus-off Specifies response
Interrupt to a CAN bus-off
interrupt
Configuring the Powermonitor 3000 using RSNetworx for DeviceNet
DeviceNet is an open-standard, multi-vendor
TIP
communications network. Although other vendors
offer DeviceNet configuration tools, all examples in
this manual will depict the use of Rockwell Software
RSNetWorx for DeviceNet.
1. Launch RSNetWorx.
Range Default
0 to 64 decimal 63
0 = 125 Kbaud 0 = 125 Kbaud
1 = 250 Kbaud
2 = 500 Kbaud
3 = Autobaud
4 =Program Baud
0 = Hold CAN 0 = Hold in Reset
chip in reset
1 = Reset CAN
chip and continue
User
Setting