Summary of Contents for Allen-Bradley ControlNet Coax Tap 1786-TPR
Page 1
Make sure you have these items before you discard any packing material. tap (1786-TPR, -TPS, -TPYR or -TPYS) BNC connector kits dust cap screws universal mounting bracket If an item is missing or incorrect, contact your Allen-Bradley distributor or sales office. 41644 AB Parts 1786-5.7 - February 1999...
Class I, Division 2 Hazardous Locations and nonhazardous locations only when installed with products bearing the Allen-Bradley ControlNet name or logo, and like certifications. CSA Hazardous Location Approval CSA certifies products for general use as well as for use in hazardous locations. Actual CSA certification is indicated by the product label as shown below, and not by statements in any user documentation.
Classe 1, Division 2 et non dangereux uniquement s’il est installé avec des produits portant le nom ou le logo ControlNet d’Allen-Bradley ou des certifications similaires. Approbation d’utilisation en environnements dangereux par la CSA La CSA certifie des produits pour une utilisation générale aussi bien que pour une utilisation en environnements dangereux. La certification CSA en vigueur est indiquée par l'étiquette produit et non par des indications dans la documentation utilisateur.
ControlNet Coax Tap Select Where to Mount Your Tap Use these guidelines to select where to mount your taps. • There is no spacing requirement between taps; you can install two adjacent taps using a barrel connector (1786-BNC). • Make sure the mounting location is convenient for your cable routing. •...
DIN rail 20082-M 20081-M Mount the universal bracket on specified Allen-Bradley mounting rails or DIN rails #3 style symmetrical (35 X 7.5mm) Type of rail Cat. No. Type of rail Cat. No. A-B rail...
ControlNet Coax Tap Mounting a Tap Through Body Holes Mount the tap to a suitable fixture using: a tie wrap screws and flat washers screws and flat washers (not supplied) body holes body holes tie wrap 41645 You can use a variety of screw types. 41646 ATTENTION: Do not over tighten the screws.
ControlNet Coax Tap Mounting Dimensions Use these mounting dimensions to mount your taps and universal mounting brackets. Universal Mounting Bracket 58.42 mm (2.30 in) 49.53 mm (1.95 in 15.47 mm (0.609 in) 19.05mm 30.94 mm (0.75 in) 9.53 mm (1.218 in) (0.375 in) 20170-M Taps...
Page 8
ControlNet™ is a trademark of ControlNet International, Ltd. Publication 1786-5.7 - February 1999 PN 955135-79 Supersedes Publication 1786-5.7 - December 1995 Copyright 1999 of Rockwell International Corporation. Printed in the U.S.A.