Sp Operation Sound On/Off Setting; Settings For @Remote Service - Ricoh D143 Field Service Manual

SP Operation Sound On/Off Setting

To turn off the SP Operation Sound
1. Enter the SP mode.
2. On the top menu screen [A], hold down the "Clear" button until you hear a beep sound. This turns
off the SP operation sound.
3. No SP operation sound can be heard in all levels [B] (SPx, SPx-xxx and SPx-xxx-xxx) of the SP
mode.
To turn on the SP Operation Sound
1. Enter the SP mode.
2. On the top menu screen [A], hold down the "Clear" button again until you hear a beep sound. This
turns on the SP operation sound.
3. SP operation sound can be hard in all levels [B] (SPx, SPx-xxx and SPx-xxx-xxx) of the SP mode.

Settings for @Remote Service

• Prepare and check the following check points before you visit the customer site. For details, ask the
@Remote key person.
Check points before making @Remote settings
1. The setting of SP5816-201 in the mainframe must be "0".
2. Device ID2 (SP5811-003) must be correctly programmed.
• 6 spaces must be put between the 3-digit prefix and the following 8-digit number (e.g.
xxx______xxxxxxxx).
• ID2 (SP5811-003) and the serial number (SP5811-001) must be the same (e.g. ID2:
A01______23456789 = serial No. A0123456789)
3. The following settings must be correctly programmed.
• Proxy server IP address (SP5816-063)
Copier Installation
47