Reassembling The Front Scanner Wire - Ricoh D143 Field Service Manual

4. Replacement and Adjustment

Reassembling the Front Scanner Wire

1. Position the center ball [A] in the middle of the forked holder.
2. Pass the right end (with the ball) [B] through the square hole. Pass the left end (with the ring) [C]
through the notch.
3. Wind the right end counterclockwise (shown from the machine's front) five times. Wind the left end
clockwise twice.
• The two red marks [D] come together when you have done this. Stick the wire to the pulley
with tape. This lets you easily handle the assembly at the time of installation.
196