Ricoh D143 Field Service Manual page 96

2. Installation
• If you will install the 1-bin tray (D632) on the machine, install the 1-bin tray first before installing
the bridge unit (D634). This makes it easy to do the following procedure.
• If you will install a finisher unit (D588, D636 or D637) on the machine, install it after installing the
bridge unit (D634).
1. Remove all tapes.
2. If the sensor feeler [A] is out, fold it into the machine.
3. Open the right door of the machine.
4. Remove the upper inner tray [B].
5. Remove the front right cover [C] (
6. Remove the connector cover [D] (
94
x 1).
x 1).