Ricoh D143 Field Service Manual page 611

SMTP Auth. Direct Setting
Selects the authentication method for SMPT.
Bit switch:
• Bit 0: LOGIN
• Bit 1: PLAIN
025
• Bit 2: CRAM MD5
• Bit 3: DIGEST MD5
• Bit 4 to 7: Not used
• This SP is activated only when SMTP authorization is enabled by UP mode.
S/MIME: MIME Header
026
Setting
5870 [Common Key Info Writing]
001 Writing
003 Initialize
5873 [SD Card Appli Move]
001 Move Exec
002 Undo Exec
5875 [SC Auto Reboot]
Selects the MIME header type of an E-mail sent
by S/MIME.
[0 to 2 / 0 / 1]
-
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
Writes to flash ROM the common proof for
*CTL
validating the device for @Remote specifications.
Initializes the data area of the common proof for
*CTL
validating.
This SP copies the application programs from the original SD card in
SD card slot 2 to an SD card in SD card slot 1.
This SP copies back the application programs from an SD card in SD
Card Slot 2 to the original SD card in SD card slot 1. Use this menu
when you have mistakenly copied some programs by using "Move
Exec" (SP5873-1).
[0 or 1 / - / – ]
Main SP Tables-5
609