Ricoh D143 Field Service Manual page 107

• Holder bracket [F] must be placed outside the front joint bracket [E]. This bracket is provided
with the Bridge Unit (D634).
8. Pull the lock lever [G] (
9. Slowly push the finisher to the left side of the machine, keeping its front door open until the brackets
[D] [E] go into their slots.
10. Push the lock lever [G], and then secure it (
11. Close the front door of the finisher.
12. Connect the finisher connector [H] to the machine.
x 1).
x 1).
2000/3000-Sheet (Booklet) Finisher (D636/D637)
105