Installation Procedure - Ricoh D143 Field Service Manual

2. Installation

Installation Procedure

• Turn off the main switch of the copier and unplug the power cord before you start the installation
procedure.
• If you will install the 1-bin tray (D632) on the machine, install the 1-bin tray first before installing
the side tray (D635). This makes it easier to do the following procedure.
1. Remove all tapes.
2. If the sensor feeler [A] is out, fold it into the machine.
3. Open the right door of the machine.
4. Remove the upper inner tray [B].
5. Remove the front right cover [C] (
6. Remove the connector cover [D] (
90
x 1).
x 1).