4. Attach the Gigabit Ethernet controller [A] into the slot [B] (
5. Install the Ethernet connector cover included in the Gigabit Ethernet board kit on the 100M bit LAN
connector.
6. Reassemble the machine.
7. Check the operation of the Gigabit Ethernet
Check All Connections
1. Plug in the power cord. Then turn on the main switch.
2. Enter the printer user mode. Then print the configuration page.
User Tools
Printer Settings
All installed options are shown in the "System Reference" column.
List Test Print
Config. Page
Controller Options
x 2).
155