Ricoh D143 Field Service Manual page 493

[Special 2: Lead. Edge Correction] Special 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in
each mode. SP2803 and SP2807 are multiplied by these SP values.
2821
Plain: High speed, 1200: Low speed
• The paper leading edge area can be adjusted with SP2822.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge in each
mode. SP2801 is multiplied by these SP values.
2821
• The paper leading edge area can be adjusted with SP2822.
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 12001st Side
[Special 2: Sw Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2822
paper leading edge between the erase margin area and the image area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
Main SP Tables-2
491