Ricoh D143 Field Service Manual page 420

5. System Maintenance
Pressure Position2
003
Specifies the rotation time of the pressure roller contact motor for the pressure position 2.
Pressure Position3
004
Specifies the rotation time of the pressure roller contact motor for the pressure position 3.
Depressure Position
005
Specifies the rotation time of the pressure roller contact motor for the depression position
(no pressure).
Shift Time: BW2
010
Specifies the timing for depressing the fusing unit. If the machine does not get any jobs for
specified time by this SP after copying or printing, the machine depresses the fusing unit.
Pressure:Plain1/2
Sets the default pressure position of the fusing unit for each paper type in normal speed.
0: Depression position (no pressure)
101
1: Position 1 (less pressure)
2: Position 2
3: Position 3 (strongest pressure)
102 Pressure:Thin
103 Pressure:M-thick
104 Pressure:Thick1
105 Pressure:Thick2
106 Pressure:Thick3
107 Pressure:Special1
108 Pressure:Special2
109 Pressure:Special3
110 Pressure:Envelope
151 Pressure:Plain1/2:Low Speed
418
*ENG [0 to 10,000 / 660 / 10 msec/step]
[0 to 10,000 / 2,130 / 10 msec/
*ENG
step]
*ENG [0 to 10,000 / 220 / 10 msec/step]
*ENG [0 to 3600 / 0 / 1 sec/step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]
*ENG [0 to 3 / 3 / 1 /step]