Ricoh D143 Field Service Manual page 575

[FreeRun]
Performs a free run on the copier engine.
5802
• The machine starts free run in the same condition as the sequence of A4/LT, A3 or
A4 SEF printing from the 1st or 2nd tray. Therefore, the correct paper should be
loaded in the 1st tray or 2nd tray, but paper is not fed.
• The main switch has to be turned off and on after using the free run mode for a test.
001 B/W A4 LEF
002 FC A4 LEF
003 FC A3 LEF
5803 [Input Check]
044 Cooling Fan: Lock
045 2nd Duct Fan2: Lock
5804 [Output Check]
5805 [Anti-Condensation Heater]
002 0:OFF / 1:ON
[SC Reset]
Resets a type A service call condition.
5810
• Turn the main switch off and on after resetting the SC code.
001 Fusing SC Reset
002 Hard High Temp. Detection
5811 [MachineSerial] Machine Serial Number Display
-
- -
*ENG
- See p.711 in this section.
0: Unlock
*ENG
1: Lock
0: Unlock
*ENG
1: Lock
- See p.711 in this section.
*ENG -
-
-
-
Main SP Tables-5
573