Ricoh D143 Field Service Manual page 739

Show "Collate Type", "Staple Type" and "Punch
Type" buttons on the operation panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch
bit 0
Type from the operation panel. The available types will depend on the device and
configured options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 Multiple copies if a paper size or type mismatch
occurs
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to
print all copies even if a paper mismatch occurs.
bit 2 DFU
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs to 1000
jobs.
Enable: Changes the maximum number of jobs that can be stored on the HDD via
Job Type settings to 1000. The default is 100.
bit 5 Face-up output
Enable: All print jobs will be output face-up in the destination tray.
bit 6 Method for determining the image rotation for the
edge to bind on.
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
Main SP Tables-9
Disable Enable
0: Disable
1: Enable
(Single
(Multiple copy)
copy)
- -
Pattern3 Pattern1
Disable Enable (1000)
(100)
Disable Enable
0: Disable 1: Enable
737