Ricoh D143 Field Service Manual page 97

7. Install the bridge unit [E] in the machine.
8. Secure the bridge unit with the long knob screw [F] and knob screw [H].
9. Attach the frame cover [I].
10. Reinstall the front right cover on the machine, and then close the right door of the machine.
• Open the bridge unit cover [J] when installing the front right cover. Otherwise, it cannot be
reinstalled.
11. Install the optional finisher (refer to the finisher installation procedure).
• Holder bracket [L] is used in the installation procedure of the finisher (D588, D636 or D637).
Do not install it at this time.
Bridge Unit Installation (D634)
95