Ricoh D143 Field Service Manual page 386

5. System Maintenance
021 Paper Tray1: Plain:1200
022 Tray1: Middle Thick:1200
023 Tray 2/3/4/5LCT: Plain:1200
024 Tray 2/3/4/5LCT: Mid:1200
025 By-pass: Plain:1200
026 By-pass: Middle Thick:1200
027 Paper Tray1: Thick1:1200
028 Paper Tray2/3/4/5/LCT: Thick 1:1200 *ENG
029 By-pass: Thick 1:1200
030 Duplex: Plain: 1200
031 Duplex: Middle Thick: 1200
032 Duplex: Thick 1: 1200
1007 [By-Pass Size Detection] By-Pass Size Detection Display
LG
Enables or disables the automatic paper size detection function of the by-pass tray.
001
This SP determines what paper size the machine detects if the detected size is less than
8.5".
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
[Reload Permit Setting]
110
1
Specifies the settings of the reload permit for cold temperature in color mode.
001 Pre-rotation Start Temp.
002 Reload Target Temp.:Center
003 Reload Target Temp.:Press
384
*ENG
*ENG
*ENG
[–9 to 5 / 0 / 1 mm/step]
*ENG
*ENG
*ENG
*ENG
[–9 to 5 / -2 / 1 mm/step]
*ENG
*ENG
[–9 to 5 / 0 / 1 mm/step]
*ENG
*ENG [–9 to 5 / -2 / 1 mm/step]
*ENG [0 or 1 / 0 / - ] 0: OFF, 1: ON
*EN
[-50 to 200 / -50 / 1 deg/step]
G
*EN [0 to 180 / C3c:158, C3d:161 / 1
G deg/step]
*EN [0 to 200 / C3c: 150, C3d: 148 / 1
G deg/step]