Ricoh D143 Field Service Manual page 508

5. System Maintenance
Consumption pattern: Bk
009
Specifies the belt mark generating time for checking the black toner density when toner
density is detected to be low at the toner density adjustment.
Consumption pattern: M
010
Specifies the belt mark generating time for checking the magenta toner density when toner
density is detected to be low at the toner density adjustment.
Consumption pattern: C
011
Specifies the belt mark generating time for checking the cyan toner density when toner
density is detected to be low at the toner density adjustment.
Consumption pattern: Y
012
Specifies the belt mark generating time for checking the yellow toner density when toner
density is detected to be low at the toner density adjustment.
T1 Bias: Bk
013
Adjusts the image transfer belt bias for Black.
T2 Bias: M
014
Adjusts the image transfer belt bias for Magenta.
T3 Bias: C
015
Adjusts the image transfer belt bias for Cyan.
T4 Bias: Y
016
Adjusts the image transfer belt bias for Yellow.
Developer Mixing Time
017
Specifies the developer mixing time at the toner density adjustment.
Consumption Pat: LD: DUTY: Bk
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
018
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-001) exceed the target values (SP3611-005) by more than the specified
thresholds (SP3239-009).
506
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 80 / C3c: 30, C3d: 37 / 1 µA/step]
*ENG [0 to 80 / C3c: 33, C3d: 41/ 1 µA/step]
*ENG [0 to 80 / C3c: 30, C3d: 37/ 1 µA/step]
*ENG [0 to 80 / C3c: 38, C3d: 47 / 1 µA/step]
*ENG [0 to 250 / 10 / 1 sec/step]
*ENG [0 to 15 / 15 / 1 /step]