Ricoh D143 Field Service Manual page 591

090 TELNET (0: OFF 1: ON)
091 Web (0: OFF 1: ON)
Active IPv6 Link Local
145
Address
Active IPv6 Stateless
147
Address 1
Active IPv6 Stateless
149
Address 2
Active IPv6 Stateless
151
Address 3
Active IPv6 Stateless
153
Address 4
Active IPv6 Stateless
155
Address 5
156 IPv6 Manual Address
158 IPv6 Gateway Address
IPv6 Stateless Auto
161
Setting
Enables or disables the Telnet protocol.
[0 or 1 / 1 / – ]
0: Disable, 1: Enable
Enables or disables the Web operation.
[0 or 1 / 1 / – ]
0: Disable, 1: Enable
This is the IPv6 local address link referenced on the Ethernet
or wireless LAN (802.11b) in the format:
"Link Local Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each.
These SPs are the IPv6 status addresses (1 to 5) referenced
on the Ethernet or wireless LAN (802.11b) in the format:
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each.
This SP is the IPv6 manually set address referenced on the
Ethernet or wireless LAN (802.11b) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each.
This SP is the IPv6 gateway address referenced on the
Ethernet or wireless LAN (802.11b). The IPv6 address
consists of a total 128 bits configured in 8 blocks of 16 bits
each.
Enables or disables the automatic setting for IPv6 stateless.
[0 or 1 / 1 / 1 /step]
0: Disable, 1: Enable
Main SP Tables-5
589