Configuring The System Settings; Sound Volume Adjustment Tab (Only Sp 320Sfn And Sp 377Sfnwx); Tray Paper Settings Tab - Ricoh SP 320SFN User Manual

8. Configuring the Machine Using Utilities

Configuring the System Settings

Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment] (only SP 320SFN and SP
377SFNwX), [Tray Paper Settings], [Copier], [Fax], [Priority Tray], [Toner Management], [Interface],
and [Shortcut to Function].

Sound Volume Adjustment Tab (only SP 320SFN and SP 377SFNwX)

Sound Volume Adjustment
Item
Panel Key Sound
Ring Volume
On Hook Mode
Job End Tone
Job Error Tone
Alarm Volume

Tray Paper Settings Tab

Tray 1
Item
Paper Size
228
Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
Select the volume of the sound when the machine is set to ring from [Off],
[Low], [Middle], or [High].
Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Select the paper size for tray 1 from the following:
A4 (210 × 297 mm), Letter (8.5 × 11), B5 (182 × 257 mm), B6 (128 ×
182 mm), A5 (210 × 148 mm), A5 (148 x 210 mm), A6 (105× 148 mm),
Legal (8.5 × 14), 8.5 × 13, 8.5 × 13.4, 8.5 × 13.6, 16K, 8.11 × 13.3,
5.5 × 8.5, Custom Size
Description
Description