When Installing A New Hdd Unit; Toner Bottle Detection Board - Ricoh D143 Field Service Manual

4. Replacement and Adjustment

When installing a new HDD unit

1. Turn the main power switch on. The disk is automatically formatted.
2. Install the stamp data using "SP5853".
3. Switch the machine off and on to enable the fixed stamps for use.

Toner Bottle Detection Board

1. Open the controller box (
2. Remove the grounding plate [A] completely (
3. Move the harnesses [C] downward to prevent the board from catching on them.
4. Pull out the toner bottle detection board [B] gently and horizontally (
338
p.319)
x 3).
x 1, x 4)