Ricoh D143 Field Service Manual page 486

5. System Maintenance
003 Paper Transfer: 2nd Side
004 Separation DC: 2nd Side
[Thick 4: Sw Timing: Lead. Edge]
2675
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
003 Paper Transfer: 2nd Side
004 Separation DC: 2nd Side
[Thick 4: Trail. Edge Correction] Thick 4 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in
each mode. SP2671 and SP2672 are multiplied by these SP values.
2676
• The paper trailing edge area can be adjusted with SP2677.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Side
004 Separation DC: 2nd Side
[Thick 4: Sw Timing: Trail. Edge]
2677
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Side
004 Separation DC: 2nd Side
484
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG