Ricoh D143 Field Service Manual page 859

No Type
HDD is connected but a driver error is detected.
The driver does not respond with the HDD within 30 seconds.
• HDD not initialized
• Label data is corrupted
• Defective HDD
• Initialize the HDD with SP5-832-001.
No Type
861 D HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is supplied
to the HDD.
• Disconnection of the cables between HDD and HDC
• Disconnection of the power supply connector
• Defective HDD
• Defective HDC
1. Turn the main power switch on.
2. Replace the HDD or the controller board.
No. Type
Bad sector number error
The number of bad sectors in the HDD (image data area) goes over 101.
862 D
• Defective HDD
1. Format the HDD with SP4-911-002 and replace with the alternate sector.
2. Replace the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call
857