Ricoh D143 Field Service Manual page 588

5. System Maintenance
Error Code
Displays a number that describes the error code that was issued when either
SP5816-204 or SP5816-207 was executed.
[-2147483647 to 2147483647 / 0 / - ]
Cause
Illegal Modem Parameter
208
Operation Error,
Incorrect Setting
Operation Error,
Incorrect Setting
Operation Error,
Incorrect Setting
208
Error Caused by
Response from GW URL
586
Code Meaning
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
Inquiry, registration attempted without
-12002
acquiring device status.
Attempted registration without execution of an
-12003
inquiry and no previous registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
@Remote communication is prohibited. The
-12005 device has an Embedded RC gate-related
problem.
A confirmation request was made after the
-12006
confirmation had been already completed.
The request number used at registration was
-12007
different from the one used at confirmation.
Update certification failed because mainframe
-12008
was in use.
D2 mismatch between an individual certification
-12009
and NVRAM.
-12010 Certification area is not initialized.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.