2. Installation
1. Remove the slot A cover [A] (
2. Install the interface board [B] (Knob-screw x 2) into the slot A.
3. Make sure that the machine can recognize the option (see 'p.155' at the end of this section).
IEEE 802.11a/g g Interface Unit Type J/K
Installation Procedure
• Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11 a/g g (Wireless
LAN), IEEE1284, Bluetooth).
144
x 2).