Ricoh D143 Field Service Manual page 983

1111 [Environment Correction:Fusing]
Temp.: Threshold: Low
001
Specifies the threshold temperature for low temperature. If the fusing temperature is 17°C
or less, the machine executes the fusing mode for low temperature.
Temp.: Threshold: High
002
Sepcifies the threshold temperature for high temperature. If the fusing temperature is 30°C
or more, the machine executes the fusing mode for high temperature.
Low Temp. Correction
003
Specifies the additional temperature for the target temperature. If the fusing temperature is
in low temperature condition, this temperature is added to the target temperature.
High Temp. Correction
004
Specifies the additional temperature for the target temperature. If the fusing temperature is
in high temperature condition, this temperature is added to the target temperature.
005 Job Low Temp. Correction
006 Job High Temp. Correction
Job Low Temp.
007
Correction:Sp.
Job High Temp.
008
Correction:Sp.
011 Standard Environment Temp.
1113 [Curl Correction]
Execute Pattern
001
Selects the curl correction type.
Humidity:Threshold:M-humid
002
Specifies the threshold between low and middle humidity.
Humidity:Threshold:H-humid
003
Specifies the threshold between middle and high humidity.
*ENG [0 to 100 / 17 / 1 deg/step]
*ENG [0 to 100 / 30 / 1 deg/step]
*ENG [0 to 15 / 5 / 1 deg/step]
*ENG [0 to 15 / 0 / 1 deg/step]
*ENG [0 to 100 / 5 / 0.1 deg/step]
*ENG [0 to 100 / 0 / 0.1 deg/step]
*ENG [0 to 100 /10 / 0.1 deg/step]
*ENG [0 to 100 / 0 / 0.1 deg/step]
*ENG [10 to 30 / 23 / 1 deg/step]
[0 to 2 / 0 / 1 /step]
*ENG
0: Off, 1: On (No Decurl), 2: On
*ENG [0 to 100 / 1 / 1 %/step]
*ENG [0 to 100 / 65 / 1 %/step]
Main SP Tables-1
59