Ricoh D143 Field Service Manual page 558

5. System Maintenance
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from the
bypass tray. When "Yes" is selected, A3 and DLT paper are counted twice, that is A4
x2 and LT x2 respectively.
Default setting: Yes
5113 [Optional Counter Type]
Default Optional Counter
001
Type
External Optional Counter
002
Type
5114 [Optional Counter I/F]
001 MF Key Card Extension
[Disable Copying]
5118
This program disables copying.
001 -
[Mode Clear Opt. Counter Removal]
5120
This program updates the information on the optional counter. When you install or remove
an optional counter, check the settings.
001 -
556
This program specifies the counter type.
0: None, 1: Key card (RK 3, 4)
2: Key card (down), 3: Prepaid card
*CTL
4: Coin rack, 5: MF key card
8: Key counter + Vendor
9: Bar-code Printer
This program specifies the external counter type.
0: None
*CTL 1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
[0: Not installed/ 1: Installed (scanning
*CTL
accounting)]
*CTL [0: Not disabled/ 1: Disabled]
[0: Yes (removed)/ 1: Standby (installed but not
*CTL
used)/ 2: No (not removed)]