3. Attach the "Adobe PostScript 3" decal [A] to the front door.
4. Plug in, and then turn on the machine.
5. Move the PostScript 3 application from the SD card in SD slot 2 (lower) to the SD card in SD slot 1
(upper) with SP5-873-001.
6. Turn off the machine.
7. Remove the SD card from SD slot 2 (lower), and then keep it in a safe place (
8. Attach the SD-card slot cover, and then turn on the machine (
9. Make sure that the machine can recognize the option (see 'Check All Connections' at the end of
this section).
IPDS Unit Type C5502
• Unplug the main machine power cord before you do the following procedure.
Controller Options
p.138).
x 1).
141