• Keep the shipping retainers after you install the machine. You may need them in the future if you
transport the machine to another location.
Tapes and Retainers
1. Remove all the tapes and retainers on the machine.
2. Remove all the tapes and retainers in trays 1 and 2, and then take out the power cord from tray 1
(if applicable).
3. Remove the scanner unit stay [A].
4. Open the front door [B], and then remove the jam location sheet [C].
5. Keep the scanner unit stay [A] inside the front door [B].
6. Reattach the jam location sheet.
7. Close the front door.
• The scanner unit stay [A] should be reinstalled before the machine is transported.
Protection Sheet (Only for single pass ADF model)
1. Open the ADF.
Copier Installation
41