Ricoh D143 Field Service Manual page 974

3. SP Mode Tables
016 Temp.:Delta:Cold:BW:Center
017 Temp.:Delta:Cold:BW:End
018 Temp.Delta:Cold:BW:Press
[Reload Permit Setting]
Specifies the setting of the forced reload permit for cold temperature in BW mode.
019 Forced Reload Time:Cold:BW
[Reload Permit Setting]
Specifies the settings of the reload permit for cold temperature in BW mode 2.
020 Temp.:Delta:Cold:BW2:Center
021 Temp.:Delta:Cold:BW2:End
022 Temp.Delta:Cold:BW2:Press
[Forced Ready Set]
Specifies the setting of the forced reload permit for cold temperature in BW mode 2.
023 Time:Cold:BW2
[Reload Permit Setting]
Enables or disables the Flicker Control.
030 Flicker Control
[Reload Permit Setting]
1101
Specifies the settings of the reload permit for target temperature in BW mode 2.
Reload Target
101
Temp.:Center:BW2
102 Reload Target Temp.:Press:BW2
50
*ENG [0 to 200 / 5 / 1 deg/step]
*ENG [0 to 200 / 5 / 1 deg/step]
[0 to 200 / C3c: 40, C3d: 26 / 1 deg/
*ENG
step]
[0 to 100 / C3c: 14, C3d: 20 / 1 sec/
*ENG
step]
*ENG [0 to 200 / C3c: 10, C3d: 5 / 1 deg/step]
*ENG [40 to 200 / 100 / 1 deg/step]
[0 to 200 / C3c: 70, C3d: 50 / 1 deg/
*ENG
step]
[0 to 100 / C3c: 20, C3d: 34 / 1 sec/
*ENG
step]
[0 to 1 / 0 / 1]
*ENG 0: Disable
1: Enable
[0 to 180 /C3c: 135(NA),130(Others),
*ENG
C3d: 140(NA), 135(Others) / 1 deg/step]
*ENG [0 to 200 / 120 / 1 deg/step]