Ricoh D143 Field Service Manual page 596

5. System Maintenance
Reso: Fax (Color)
125
Selects the resolution for color fax mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
Reso: Fax (Mono)
126
Selects the resolution for BW fax mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
Reso: Scan (Color)
127
Selects the resolution for color scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
Reso: Scan (Mono)
128
Selects the resolution for BW scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
5840 [IEEE 802.11]
Channel Max
Sets the maximum number of channels available for data transmission via the wireless
006
LAN. The number of channels available varies according to location. The default settings
are set for the maximum end of the range for each area. Adjust the upper 4 bits to set the
maximum number of channels. DFU
• Do not change the setting.
594
This is basically adjusted by the remote system.
[0 to 6 / 4 / 1/step]
This is basically adjusted by the remote system.
[0 to 6 / 3 / 1/step]
This is basically adjusted by the remote system.
[0 to 6 / 4 / 1/step]
This is basically adjusted by the remote system.
[0 to 6 / 3 / 1/step]
[1 to 11 or 13 / 11 or 13 / 1 /step]
*CTL Europe/Asia: 1 to 13
NA/ Asia: 1 to 11