Ricoh D143 Field Service Manual page 101

• Holder bracket [C] must be placed outside the front joint bracket [B]. This bracket is provided
with the Bridge Unit (D634).
3. Install the grounding plate [A] on the finisher (
• Use the screw removed in step 1 and the screw from the accessory box.
4. Open the front door [B]. Then pull the locking lever [C].
5. Align the finisher on the joint brackets, and lock it in place by pushing the locking lever.
6. Secure the locking lever [C] (
7. Install the copy tray [D] (
8. Connect the finisher cable [E] to the main machine.
x 2; M3 x 8).
x 1; knob M3 x 8) and close the front door.
x 1; knob M4 x 10).
Finisher SR3090 (D588)
99