Ricoh D143 Field Service Manual page 615

001 Switch Charge Mode
[Application Invalidation]
5895
Enables or disables the printer or scanner application.
These SPs are used only when an external controller is installed in the machine.
001 Printer
002 Scanner
5907 [Plug & Play Maker/Model Name]
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names should be
registered again.
001
After selecting, press the "Original Type" key and "#" key at the same time. When the
setting is completed, the beeper sounds five times.
5913 [Switchover Permission Time]
Print Application Timer
Sets the amount of time to elapse while the machine is in standby mode (and the
002
operation panel keys have not been used) before another application can gain control
of the display.
5967 [Copy Server : Set Function]
Enables and disables the document server. This is a security measure that prevents image
001 data from being left in the temporary area of the HDD. After changing this setting, you
must switch the main switch off and on to enable the new setting.
[Cherry Server]
5974
Specifies which version of ScanRouter, "Lite" or "Full", is installed.
001 (0:Light 1:Full)
*ENG [0 to 2 / 0 / 1/step]
*CTL [0 or 1 / 0 / -]
0: Enable
*CTL
1: Disable
*CTL [3 to 30 / 3 / 1 second /step]
*CTL 0: ON, 1: OFF
*CTL [0 or 1 / 0 / – ]
Main SP Tables-5
613