Date/Time Setting
Use the User Tools menu to set the current date and time.
On the operation panel, press the User Tools key.
On the touch-panel, press "System Settings".
Push the "Timer Setting" tab.
Push "Set Date" then enter the date.
Push "Set Time" then enter the time.
SP Codes Setting
SP No.
SP3-001-6
Tel. Number for Service
SP3-001-9
Master Name Input
SP3-001-10
Ink Name Input
Changing the operation panel language
There are only two languages in the machine. If you need to change the language,
please refer to the firmware update procedure in section 5.5.
SM
Menu
Do this SP and input the contact numbers of
the customer engineer. These numbers are
shown when a service call is issued.
These names appear when the user pushes
the Inquiry button on the User Tools screen.
1-17
INSTALLATION PROCEDURE
Function
C262/C265