Ricoh D143 Field Service Manual page 620

5. System Maintenance
[Stamp Position Adj.] Fax Stamp Position Adjustment
6010
Adjusts the horizontal position of the stamp on the scanned originals.
001 -
[Original Size Detect Setting]
6016
Specifies the original size for a size detected by the original sensor, since original sensors
cannot recognize all sizes.
001 -
[DF Magnification Adj.] DF Magnification Adjustment
6017
Adjusts the magnification in the sub-scan direction for the ARDF.
001 -
[Skew Correction Moving Setting]
6020
Turns the original skew correction in the ARDF for all original sizes on or off.
001 -
618
*ENG [-5.0 to 5.0 / 0 / 1 mm/step]
[0 or 1 / - / - ]
*ENG
0: Setting 1, 1: Setting 2
Setting 1
DLT SEF
NA LG SEF
LT SEF
LT LEF
DLT SEF
EU/
LT SEF
ASIA
LT LEF
*CTL [-5.0 to 5.0 / 0 / 0.1 %/step]
[0 or 1 / 0 / - ]
*ENG 0: Off (only for small original sizes)
1: On (for all original sizes)
Setting 2
Folio SEF 11" x 15"
Foolscap SEF
US EXE 8" x 10"
US EXE LEF
8K 267 x 390 mm
16K 195 x 267 mm
16K 267 x 195 mm