7
PARAMETER SETTINGS
This chapter describes the parameter setting required for the FX5-ASL-M.
7.1
Parameter Setting Procedure
1.
Add the FX5-ASL-M to GX Works3.
[Navigation window] [Parameter] [Module Information] Right click [Add New Module]
2.
The parameter setting includes a basic setting and refresh setting. Select the settings in the tree and set the items in the
following window.
[Navigation window] [Parameter] [Module Information] [FX5-ASL-M] [Module Parameter]
3.
Write the setting to the CPU module with GX Works3.
[Online] [Write to PLC]
4.
Reset the CPU module or power off and on the system to apply the setting.
7.2
Basic Setting
Set the number of transmission points of the FX5-ASL-M and others.
7 PARAMETER SETTINGS
7.1 Parameter Setting Procedure
7
51