Remote Device Station Initial Setting Procedure Registration Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

1.4
Remote Device Station Initial Setting Procedure
Registration Function
The initial setting of a remote device station which is performed on a program can be registered in advance using an
engineering tool and can be saved by turning on the link special relay (SB). A program for the initial setting is not required.
Number of initial settings registered
■Number of remote device stations
The initial settings of up to 64 remote device stations can be registered in one master/local module.
■Number of initial settings registered per remote device station
Up to 32 items of the initial settings can be registered per remote device station. An engineering tool and program cannot be
used together for the initial setting in one remote device station. If they are used together, a remote device station may
malfunction.
■If the processing has stopped
Information about an initial setting in progress is stored in 'Remote device station initialization procedure registration
execution individual information' (buffer memory addresses: Un\G23680 to Un\G23743) of the master/local module. If the
processing has stopped halfway, information such as the number of the procedure that has stopped and the target station
number can be checked.
Setting method
Configure the setting of the remote device station initial setting procedure registration function in "Initial Settings" under "Basic
Settings". Then use 'Remote device station initialization procedure registration instruction' (SB000D) to reflect the initial
settings to the remote device station. ( Page 65 Initial Settings)
1 FUNCTIONS
50

1.4 Remote Device Station Initial Setting Procedure Registration Function