I/O Setting Parameters ([Pr. Pd - Mitsubishi Electric MR-JE-*C Instruction Manual

4. PARAMETERS

4.2.3 I/O setting parameters ([Pr. PD_ _ ])

No./symbol/ Setting
name digit
PD03 Select input devices to turn on automatically.
*DIA3 When setting the "Command interface selection" of [Pr. PN08] to "_ _ _ 1
(Communication interface)", the setting value of this parameter is invalid.
Input signal
automatic on
_ _ _ x _ _ _ x (BIN): MD0 (Operation mode selection 1)
selection 3
(HEX) 0: Disabled (Use for an external input signal.)
1: Enabled (automatic on)
_ _ x _ (BIN): MD1 (Operation mode selection 2)
0: Disabled (Use for an external input signal.)
1: Enabled (automatic on)
_ x _ _ (BIN): For manufacturer setting
x _ _ _ (BIN): For manufacturer setting
_ _ x _ _ _ _ x (BIN): For manufacturer setting
(HEX)
_ _ x _ (BIN): For manufacturer setting
_ x _ _ (BIN): OVR (Analog override selection)
0: Disabled (Use for an external input signal.)
1: Enabled (automatic on)
x _ _ _ (BIN): For manufacturer setting
_ x _ _ _ _ _ x (BIN): For manufacturer setting
(HEX)
_ _ x _ (BIN): For manufacturer setting
_ x _ _ (BIN): For manufacturer setting
x _ _ _ (BIN): For manufacturer setting
x _ _ _ _ _ _ x (BIN): For manufacturer setting
(HEX)
_ _ x _ (BIN): For manufacturer setting
_ x _ _ (BIN): For manufacturer setting
x _ _ _ (BIN): For manufacturer setting
Function
4 - 24
General
Initial
Communication
purpose
value
[unit]
CP PS CP PS
0h
0h
0h
0h