Mitsubishi Electric MR-JE-*C Instruction Manual page 59

4. PARAMETERS
No./symbol/ Setting
name digit
PC66 Set the upper limit value of the touch probe detection.
LPSPL Upper and lower are a set.
Touch probe When the roll feed display is enabled, set the value with the travel
detection distance from the starting position. Set the value in hexadecimal.
range + (lower
four digits)
Setting value:
The unit can be changed to 10
setting of [Pr. PT01].
Setting range: 00000000h to FFFFFFFFh
PC67 Set the upper limit value of the touch probe detection.
LPSPH Upper and lower are a set.
Touch probe When the roll feed display is enabled, set the value with the travel
detection distance from the starting position. Set the value in hexadecimal.
range +
Refer to [Pr. PC66] for details.
(upper four
The unit can be changed to 10
digits)
setting of [Pr. PT01].
PC68 Set the lower limit value of the touch probe detection.
LPSNL Upper and lower are a set.
Touch probe When the roll feed display is enabled, set the value with the travel
detection distance from the starting position. Set the value in hexadecimal.
range - (lower
four digits)
Setting value:
The unit can be changed to 10
setting of [Pr. PT01].
Setting range: 00000000h to FFFFFFFFh
PC69 Set the lower limit value of the touch probe detection.
LPSNH Upper and lower are a set.
Touch probe When the roll feed display is enabled, set the value with the travel
detection distance from the starting position. Set the value in hexadecimal.
range - (upper
Refer to [Pr. PC68] for details.
four digits)
The unit can be changed to 10
setting of [Pr. PT01].
Function
Upper four Lower four
digits digits
[Pr. PC66]
[Pr. PC67]
STM [μm], 10 (STM-4)
STM [μm], 10 (STM-4)
Upper four Lower four
digits digits
[Pr. PC68]
[Pr. PC69]
STM [μm], 10 (STM-4)
[μm], 10
STM (STM-4)
4 - 22
Initial
value
[unit]
0000h
Refer to
Function
column
for unit.
[inch], or [pulse] with the
0000h
Refer to
Function
column
for unit.
[inch], or [pulse] with the
0000h
Refer to
Function
column
for unit.
[inch], or [pulse] with the
0000h
Refer to
Function
column
for unit.
[inch], or [pulse] with the
General
Communication
purpose
CP PS CP PS