Mitsubishi Electric MR-JE-*C Instruction Manual page 66

4. PARAMETERS
No./symbol/ Setting
name digit
PD15 Optional input device can be assigned to the CN3-8 pin.
*DI4M
_ _ x x Not used with the positioning mode.
Input device
x x _ _ Positioning mode - Device selection
selection 4M
Refer to table 4.2 in [Pr. PD06] for setting value.
PD18 Optional input device can be assigned to the CN3-21 pin.
*DI5M
_ _ x x Not used with the positioning mode.
Input device
x x _ _ Positioning mode - Device selection
selection 5M
Refer to table 4.2 in [Pr. PD06] for setting value.
PD24 Optional input device can be assigned to the CN3-6 pin.
*DI7M
_ _ x x Not used with the positioning mode.
Input device
x x _ _ Positioning mode - Device selection
selection 7M
Refer to table 4.2 in [Pr. PD06] for setting value.
When "00" is set, PP (Forward rotation pulse/Manual pulse generator) is
assigned.
PD27 Optional input device can be assigned to the CN3-19 pin.
*DI8M
_ _ x x Not used with the positioning mode.
Input device
x x _ _ Positioning mode - Device selection
selection 8M
Refer to table 4.2 in [Pr. PD06] for setting value.
When "00" is set, NP (Reverse rotation pulse/Manual pulse generator) is
assigned.
Function
4 - 29
General
Initial
Communication
purpose
value
[unit]
CP PS CP PS
07h
38h
08h
20h
00h
00h
00h
00h