Table of Contents
Advertisement
Screen Reference
CONFIGURATION
Test Setup: Test Condition Screen
If the Test Setup softkey in the CONFIGURATION screen is pressed, the Test
Setup: Test Condition screen is displayed as follows:
Figure 3-62
Test Setup: Test Condition Screen
For the GPRS mode with MANUAL TEST, the test limits for BER, FER, RX
NOTE
Quality, and RX Level will not be effective.
148
Softkey Menu
o Print: Allows you to print a hardcopy of a graphic image from the screen.
o Print All: Allows you to print a hardcopy set of the whole contents for the
CONFIGURATION, Test Sequence, and Test Condition screens for all
radio standards.
o File Management: Allows you to go to the File Management screen to store
a new test setup file into an SRAM memory card, or to load a test setup file
from an SRAM memory card. Refer to
o Test Sequence: This softkey toggles the screens between Test Sequence and
Test Condition.
o Return: Displays the CONFIGURATION screen and then the initial screen
with function modes.
"File Management" on page
160.
Chapter 3
Advertisement
Table of Contents
