Ethernet Setting - RADWAG WPW/E User Manual

14.2. ETHERNET setting

ETHERNET can be configured in <P2.4 ETHERNET>.
Inventory of default parameters:
No NAME
P2.4.1 WORK MODE
IP ADDRESS
P2.4.2
P2.4.3 SUBNET MASK
P2.4.4 GATEWAY
LOCAL PORT
P2.4.5
HOST IP
P2.4.6
HOST PORT
P2.4.7
P2.4.8 TIMEOUT
Caution:
1. For appropriate setting of: <P2.4.2 IP ADDRESS>,
<P2.4.3 SUBNET MASK>, <P2.4.4 GATEWAY>
contact the supervisor of the net to connect with;
2. The way of connection via ETHERNET to the program
EDYTOR WPW is described in chapter 32.2.3.
3. The scale does not allow the automatic fetch of net
configuration from DHCP servers.
VALUE
SERVER, CLIENT
192.168.0.2
255.255.255.0
192.168.0.1
4001
192.168.0.3
2000
60
- 37 -
DESCRIPTION
Ethernet connection as Server or Client.
SERVER – scale waits for connection
CLIENT – scale initiates the connection
to a HOST.
Setting an IP address.
Setting a subnet mask for Ethernet
connection.
Setting a gateway for Ethernet
connection.
Setting a local port for Ethernet
connection. Only for devices that
work as SERVER. Servers waits
for connection on the specified port.
Setting a host IP address (IP of a device
to connect with). Applicable only for
devices configured as CLIENTs.
Setting a Host port (a port for connection
with a computer). Applicable only for
devices configured as CLIENTs.
Time (in seconds) after which none-
active Ethernet connection is being
broken. Set to 0 to stop breaking the
connection.