• Avoid side loads, particularly side shocks should be avoided:
12.2. Tarring
In order to determine the net mass put the packaging on the pan.
After stabilising press -
(Net pictogram will be displayed in
the left upper corner and zero will be indicated).
After placing a load on the weight pan net mass will be shown.
Tarring is possible within the whole range of the scale. After unloading
the pan the display shows the tarred value with minus sign.
Notice:
Tarring cannot be performer when a negative or zero value is being
displayed. In such case Err3 appears on the display and a short beep
sound will be emitted.
12.3. Inscribing tare value
You can also inscribe a tare value:
Procedure:
While in weighings mode:
- 23 -